The wire rope electric hoist is a small lifting equipment. The wire rope electric hoist has the advantages of compact structure, light weight, small size, strong parts versatility, and easy operation. It can be installed alone on the I-beam or as a set. Used on electric or manual single-girder, double-girder, cantilever, gantry and other cranes.The load capacity is usually 1-50 tons, and the lifting height is generally 6M, 9M, 12M, 18M, 24M, 30M, 36M.

Advantage

1. The motor adopts a conical rotor motor, which integrates power and braking force.
2. The hook is made of high-strength steel (20Cr) and equipped with a locking device.
3. It has protection functions such as overload, overcurrent, voltage loss, and phase failure.
4. The power supply has a wide range of applications, adopts 36V safety voltage control, and can be divided into wireless and wired operation, making the operation safer.
5. Braking materials do not contain harmful components such as asbestos, making the product more environmentally friendly.
6. Standard Wooden Case.

Structure

1. The CD1 type has a single-speed lifting speed, and the MD1 type has a double-speed lifting speed, which is an additional slow speed on the basis of CD1. Generally speaking, the slow speed is one-tenth of the fast speed.
2. In terms of configuration, MD1 type has one more auxiliary hoisting motor than CD1 type. The hoisting motor is a dual motor. It has a small hoisting motor in parallel with the CD1 hoisting motor. The CD1 type hoisting motor has only one motor, which is easy to distinguish from its appearance.
3. In terms of use, MD1 has one more variable speed than CD1 wire rope electric hoist, so when lifting objects, MD1 can reach a certain specified height more accurately, while CD1 type lifts faster and can easily exceed the specified position. Especially when the requirements for the lifting position are strict and work efficiency is required, you can first use the slow speed, that is, the normal speed, and then switch to the slow speed when it is close to the designated lifting or lowering position, so that you can Get closer to the designated location little by little.
   Therefore, CD1 type wire rope electric hoist can be used for general use. For precision installation, clamping work, sand casting and other occasions that require precise adjustment, it is recommended to use MD1 type electric hoist.